|
|
 |
If you want to buy AMSOIL Products,
visit the
AMSOIL On-Line Store
DOMINATOR Synthetic 2-Cycle Racing Oil
 |
New AMSOIL DOMINATOR Synthetic 2-Cycle Racing
Oil is a robust formulation specially engineered for unsurpassed
protection in high performance two-cycle motors, both on and off
the track. It contains heavier synthetic base oils that provide
more lubricity for "on the edge" operation. DOMINATOR reduces
friction and protects pistons and bearings subjected to the
rigors of racing. DOMINATOR contains the right additives for
clean motor operation.
-
Provides excellent film strength for high heat, high RPM
motors
-
Reduces friction for maximum power
-
Recommended for use with coated or non-coated racing
pistons
-
Recommended for use with exhaust power valves
-
Recommended for use with high octane racing gas
-
Burns clean; Prevents ring sticking and plug fouling
- Provides excellent protection at 50:1 pre-mix or in
injection system
|
Product Code: TDR
DOMINATOR, an AMSOIL exclusive formulation, lubricates and protects high
performance two-cycle motors, both on and off the track. High performance
motors, particularly those that are modified, operate hotter and at higher
RPMs than recreational motors, and they need good oil for peak performance.
DOMINATOR is engineered for racing. It has the right film strength and clean
burning properties for "on the edge" operation.
Super Film Strength
High performance two-cycle motors have high compression ratios, which
significantly increase combustion chamber heat and crankshaft bearing
pressures. Hot combustion processes quickly burn off and evaporate light
oils and cause rapid piston expansion, decreasing piston-to-cylinder wall
clearances. This promotes piston scuffing and possible seizure. And
increased pressure on crankshaft bearings promotes metal-to-metal contact,
wear and pitting.
High heat and pressures require tough oil with better film strength and more
lubricity. DOMINATOR, constructed with AMSOIL heavy synthetic oil, handles
high heat better than mineral oils and provides improved film strength and
lubricity. DOMINATOR reduces friction and provides an extra measure of
protection against piston scuffing and crankshaft bearing wear.
Clean Burning
High combustion processes require the proper additives and oils to control
deposits. DOMINATOR contains strong, high temperature detergent additives
and highly pure AMSOIL synthetic oil. It prevents deposits that cause ring
sticking, plug fouling and exhaust port blocking. DOMINATOR is an optimized
product for severe service.
Applications
DOMINATOR is recommended for use in high performance stock or modified
two-cycle motors, including air or liquid cooled snowmobiles, personal
watercraft, motorcycles (Moto X), ATVs, go-carts and outboard motors*. Good
for use with coated or non-coated pistons, high-octane racing fuels and
exhaust power valves. Compatible with most other two-cycle oils, however,
mixing oils should be minimized.
Use at 50:1 pre-mix ratios (2.6 oz. oil per U.S. gallon of gas) or as
injection oil where JASO FC or API TC oils are specified. Not suitable for
use with alcohol or nitro-methane fuels.
* Not suitable for long-term use in outboard motors as a TC-W3 type oil,
although excellent as a race oil for short-term use where motors are
periodically inspected.
|
TYPICAL TECHNICAL PROPERTIES
DOMINATOR Synthetic 2-Cycle Racing Oil
|
|
Kinematic Viscosity @ 100°C, cSt
(ASTM D-445) |
7.6 |
|
Kinematic Viscosity @ 40°C, cSt (ASTM
D-445) |
40.9 |
| Viscosity Index (ASTM D-2270) |
156 |
|
Pour Point °C (°F) (ASTM D 97) |
-48 (-54) |
|
Flash Point °C (°F) (ASTM D 92)
|
92 (198) |
| Fire Point °C (°F) (ASTM D 92) |
97 (207) |
| DANGER:
harmful or fatal if swallowed. Contains synthetic lubricant and
petroleum distillates. If swallowed do not induce vomiting. Contact
a physician immediately. Keep away from fire, heat and open flame.
Use with adequate ventilation. Avoid frequent or prolonged skin
contact. Flush eyes with water for 15 minutes in case of contact.
KEEP OUT OF REACH OF CHILDREN. |
|
AMSOIL®
Synthetic 2-Cycle Oil Recommendations |
|
AMSOIL Product |
Outboard* |
Snowmobile*
Motorcycle* & ATV* |
Personal Watercraft*
& Jet Boat* |
Chain Saw,
Chop Saw & Pump |
Weed Eater, Blower
& Lawn Mower |
Moped, Scooter
& Go-Cart |
HP Injector
(HPI)
(Injection or 50:1 Pre-Mix) |
Excellent |
Very Good |
Very Good |
Not Recommended |
Not Recommended |
Not Recommended |
|
INTERCEPTOR
(AIT) |
Not Recommended |
Excellent |
Excellent |
Good |
Good |
Good |
|
DOMINATOR
(TDR) |
Racing
(1) |
Racing
(2)
|
Racing
(2) |
Very Good |
Very Good |
Very Good |
|
Saber Professional 100:1
(ATP) |
Not Recommended |
Very Good
Pre-Mix Only |
Very Good
Pre-Mix Only |
Excellent |
Excellent |
Excellent |
|
Saber Outboard 100:1
(ATO) |
Excellent
Pre-Mix Only |
Very Good
Pre-Mix Only
|
Very Good
Pre-Mix Only |
Not Recommended |
Not Recommended |
Not Recommended |
AMSOIL is the undisputed leader in
synthetics.............

Since
1972, AMSOIL
Synthetics have proven to be the BEST.
AMSOIL also engineers and manufactures Ea Oil
Filters with Nanofiber Technology which have a 25,000 mile/1-year service life as well as
specialized filtration systems for commercial and fleet
applications in cars and light, medium and heavy trucks which
can filter particles down to less than one micron (a standard
full flow oil filter can only filter to 20-25 microns, and at
a reduced efficiency) making oil changes virtually
unnecessary and virtually eliminating engine wear.
These filters have been proven by millions of miles of
over-the road trucks, construction equipment and fleet
service.
-
AMSOIL saves you time and money.
-
The only 25,000 mile/one- year and 35,000/one-
year motor oil in the world.
-
Exceeds the most stringent performance
specifications of all major U.S. and foreign automotive and truck
manufacturers.
-
Provides up to two-times the wear protection of
other motor oils.
-
Increases the life of your vehicle.
-
Improves performance, fuel economy and
efficiency.
-
Diesel oil and filtration products designed to
deliver 1,000,000 miles for over-the-road trucks before engine overhaul.
-
Used by many national racing teams, fleets,
police departments, construction firms and trucking companies.
Oils-n-Filters.com is comprised of a group of highly skilled team of Engineers and Lubrication and
Filtration Specialists. You too, can join our group when you become an AMSOIL
Dealer and take advantage of all that we offer as you use products in your own
vehicles or begin your own AMSOIL business. You won't find a more knowledgeable
and skilled group of Dealers anywhere which is very important when you need
support as you build your business.
In addition, as a Dealer in our Group you will receive exclusive unlimited
product, technical and business support from the only group of Truck and
Automotive Engineers and Lubrication Specialists on the net.
Dealers in our Group will also receive an exclusive business
and internet promotional package.
Please, email us at
info@oils-n-filters.com for more details.
We do not only run our business on the internet. We also have numerous
commercial, industrial, trucking, excavating, construction, logging, police,
racing and many more accounts that we support and service on a regular basis. We
have several fully stocked warehouses and fully equipped shop facilities. This
provides us with excellent knowledge of the products, equipment and the business
and the ability to respond immediately to any of your needs.
We will use this
knowledge and experience to help you get started so you too can achieve your
goals.
We possess the skills, desire and knowledge to answer questions, solve problems,
improve efficiency, reduce downtime, maintenance costs and increase the
durability and life of all of your vehicles.
Read what our satisfied customers have to say about us. Read through our
website. Contact us with any questions. If you decide to become an AMSOIL Dealer
you will be joining, in our opinion, the most skilled AMSOIL group there is. We
will help you get started and provide you with the tools and information in
order to be successful in this business or with technical and product assistance
to use AMSOIL products in your own vehicles.
We offer several options to receive information on AMSOIL. We welcome the
opportunity to work with you personally as your servicing AMSOIL Dealer. Our
AMSOIL Dealer Group is led by a Truck/Automotive Engineer and Lubrication
Specialist with over 23 years experience. This exceptional benefit is
unavailable elsewhere.
Please, email us at
info@oils-n-filters.com and
we will send you an exclusive
comprehensive package of product, technical and business information.
If you are
serious about AMSOIL products and the business opportunity this is the best
option. You will receive extensive technical and business support from both
myself and my Direct Jobber, a Detroit, Michigan Truck/Automotive Engineer and
Lubrication Specialist with over 23 years experience. We look forward to helping
you learn about AMSOIL.
Or for a smaller, very general information package (which includes a catalog and
Dealer application) you can request information via any of the links below.
To request a FREE Factory Direct Catalog
For Information on Becoming an AMSOIL Dealer
To Buy AMSOIL Products in the AMSOIL On-Line Store
Become a Preferred Customer- Purchase AMSOIL Products Factory Direct at
Wholesale Prices- Save About 25-30%
To Sell AMSOIL in Your Store or Purchase For Use in
Your Businesses Equipment
To visit the AMSOIL Corporate Website for Product
and Business Opportunity Information
AMSOIL PowerSports Portal - We Put The Power in PowerSports
Diesel Power Site Forum for Power Stroke, Duramax and Dodge Cummins
Turbodiesel
AMSOIL is Proudly Made in the U.S.A.
AMSOIL is America's Oil.
Largest and Most Knowledgeable
AMSOIL Group in the U.S & Canada led by the only AMSOIL Regency Platinum 6 Star
Direct Jobber in the Organization who is also a former Ford Motor Company Senior
Powertrain and Chassis Engineer.
Home |
Contact Us |
On-Line Store |
Privacy Policy

Oils-n-Filters.com
Gary and Nancy Roger
Omaha, NE 68114
Phone: 877-897-6865
Email:
info@oils-n-filters.com
|
 |